Main Function:
CNC system once setting and automatic guides where work-piece loading place, automatic measurement, surface process, which can reduce working strength of operator and increase Productivity, maintain high accuracy for dimension, squareness and parallelism.
Machine structure features :
1. Horizontal grinding head
1. Horizontal grinding head
The horizontal grinding head adopts high-precision flange type spindle design. With three pairs of super-precision angular contact bearings (made in Japan/Germany), using high-temperature resistant high-grade lubricating grease, completely sealed, no need for additional maintenance. Therefore, it can maintain high quality characteristics such as low noise, high precision and low temperature during grinding.
2.Worktable drive
2.Worktable drive
The worktable adopts the fully supported double V self-positioning type hard rail design, the base rail is processed by high frequency, HRC55°±3°, the worktable rail is affixed with PTFE rail tape, to ensure the good smoothness and guidance of the table motion rail.
3.Gantry frame
3.Gantry frame
The lower part of the double column is firmly connected with the bed, the upper part is tightly connected with the beam, and the machine bed, the double column and the beam form a rigid closed frame structure.
4&5 Grinding head drive & Grinding wheel
4. Grinding head drive
The grinding head is equipped with AC servo electric drive, with large torque and accurate feed.
5. Grinding wheel
The grinding machine is equipped with a safety type grinding wheel with buffer protection device. The wheel adopts reasonable structural transformation, so that the safety of the operator is guaranteed.
6. Lubrication system
6.Lubrication system
The machine base adopts automatic circulating lubrication device. The horizontal and vertical motion guide rails and the ball screw adopt timing and quantitative automatic lubrication device, the operation is humanized, and the machine runs safely and reliably.
7&8 Cooling system & Pipeline protection
7.Cooling system
The machine coolant device is recycled after multi-stage filtration
8. Pipeline protection
The horizontal and vertical movement pipelines of the machine adopt towline mechanism, which is safe and beautiful.
9&10 Hydraulic control system & Electric Magnet
9. Hydraulic control system
The hydraulic system uses an independent hydraulic station. The hydraulic system controls the balance of the longitudinal movement of the worktable and the vertical movement of the grinding head.
10. Electric Magnet
The electric permanent magnet does not need electric energy during the working process, and only uses the permanent magnetic suction to hold the workpiece. It does not use any energy in work and produces safe, strong and efficient power, which is economical and environmentally friendly.
Machine tool control function:
1.Operation panel
The operation panel is easy to run machine. The button board are integrated together. Such illuminated buttons can be operated as well as related status displays.
2.Operating system touch screen
The operating system of the machine adopts Touch Screen.
Specification:
| Item |
Unit |
HG-1420NC |
| Capacity |
Max. Grinding size(W*L) |
mm |
1100*2000 |
| Worktable size(W*L) |
mm |
1000*2000 |
| Max. thinckness |
mm |
500 |
| Net width of inside |
mm |
1400 |
| Max. Loading weight |
KG |
3000 |
| Electric disk size |
mm |
1000*2000 |
Grinding head
|
Spindle motor |
KW |
15 |
| Spindle size |
mm |
Ф170 |
| rpm |
rpm |
1400 |
| Grinding wheel size |
mm |
Ф500x80x203 |
| Motor Power |
Worktable drive motor |
KW |
11 |
Left and right moving motor
|
KW |
2.0/10N.M |
| Up and down moving motor |
KW |
2.0/15N.M |
| Water pump motor |
KW |
0.5 |
| Speed |
Front and back moving speed |
M/min |
5-28 |
| Left and right moving speed |
mm/min |
5-3000 |
| Up and down moving speed |
mm/min |
5-3000 |
| Size |
Space |
mm |
8000*3600 |
| Machine height |
mm |
3200 |
| Machine Weight |
KG |
16000 |
| Other |
Power supply |
V/HZ |
380V-50HZ |
Main part of CNC Planer Grinding Machine HG-1420NC
| Sort |
Name |
Quantity |
Origin |
Remark |
| Machinery |
Worktable ball screw |
3 |
Taiwan HIWIN |
Steady transmission,High accuracy, Wear-proof |
| Guide rail |
3 |
Taiwan HIWIN |
Good bearing Strong stability |
Main Spindle
(Vertical) |
1 |
Taiwan JiXin |
Low noise, high strength, Taiwan famous brand |
| Flexible stainless steel plate shield of worktable |
2 |
Domestic |
High strength, Strong durability, dust-proof, Protect the guide rail and ball screw. |
| Base casting |
1 |
HT300 |
Good stability, excellent wear-ability |
| Automatic lubricating machine |
3 |
Domestic |
Electronic-self-lubrication, Quantitative oil supply to the each part |
| Oil line |
3 |
Domestic |
Copper tube |
| Bearing |
|
JAPAN NACHI |
World famous brand, High accuracy, High quality |
| Electrical appliances |
CNC system |
1 |
Japan FANUC |
Top brand of CNC |
| Servo motor |
3 |
Japan FANUC |
Top brand of CNC |
| High precision electromagnetic table |
1 |
Taiwan Brand |
Taiwan famous brand, High accuracy |
| Spindle motor |
1 |
CTB/MK |
Multitronic, Meet the requirements of different processing speed |
| AC contactor |
|
Schneider |
Famous brand, steady property |
| Relay |
|
Schneider |
Packing and shipping
To be packed in fumigation wooden case or in steel box,suitable for long distance ocean transportation,well protected against moisture and shocks,pressure wetness.
The benefits of GOODA maintenance contract (After sales 3 years):
- Basic requirement in a certified QS system
- Guarantee for the accuracy of the measuring and test results
- Calibration, maintenance and, if necessary, repair with just one visit
- Fixed prices with a clear breakdown of costs
- Preventive maintenance helps you avoid expensive faults and ensures a high level of quality that lasts
The maintenance contract includes:
- Travelling time and expenses for our technician
- Maintenance and calibration work
- Small items required for carrying out the specified maintenance work
- Calibration with a corresponding maintenance and test report, allowing the results to be used to demonstrate compliance with national standards
ABOUT US :
We are the first manufacturer to produce the high-end CNC machine in China, who focusing on developing and supplying the high efficiency, high accuracy, and high quality of CNC Duplex Milling Machine, CNC Vertical Milling Machine,CNC Gantry Grinding Machine, 5-Axis High Speed Machining Center , CNC High Speed Saw Machine and CNC Chamfering Machine. Our aspiration is to be flexible in implementing customer requirements, guarantee the high reliability of the milling machine, ensure that spare parts are available at short notice and facilitate the prompt availability of service engineers.
According to following standards:
1.TUV ISO 9001 certificate
2.TUV certificate
3.SGS certificate
4.CE certificate
5.More than 39 patents certificate
6.National High-tech Enterprises certificate
Main products:CNC duplex milling machine,CNC high speed sawing machine, CNC Vertical milling machine,CNC Gantry milling machine, CNC Machining Center, CNC three Axis Chamfering machine,CNC Planar Grinding machine,Plate flipping machine.The application scope of the products includes mold steel,moldbase, aluminum plate,die processing and other metal cutting.After years of research and development and innovation, the products are at the leading level in terms of processing accuracy,machine stabilitym,Ergonomic design and other technical performance. With the continuous improvement of market demand, GooDa has launched six side processing solutions, indirectly promoting the development of China's mold industry.
Benefits:
- Has obtained dozens of patent technology and software copyright, and has successively passed the ISO 9001 quality management system certification and CE product safety certification of the European Union TUV certification, national high-tech enterprise evaluation and other honors
- After sale service, deliver high reliability with an emphasis on efficient maintenance service all the time. Maintain part-to-part consistency. we will help you at once when there is a problem. Besides, we will check machine regularly.
- Machines come wired for USA electricity or your local electricity.
- We supply expert installation and training.
- Save you time and money and increase your productivity by high speed milling.
- Maximize tool life assuring your production will pay dividends for many years.
FAQ:
1. What is your minimum order quantity and warranty?
MOQ is one set, and warranty is one year.
2.What CNC system do you use?
FANUC, SIEMENS, MISTSUBISHI etc. It depends on your choice.
3.When is the delivery time?
Conventional Machines,We will delivery then within 30-45 working days after received your
deposit,if some special machines will be some longer.we will give you the answer accordingly.
4. What is the package of the machines?
Packing: PE bag cover inside+ Plywood box + Steel beam frame.
5.How can I choose the most suitable machines ?
Please let us know your machining demand or machine size ,we can choose the best model
for you , or you can choose the exact model by yourself. You can also send us the products
drawing ,we will choose the most suitable machines for you .
6. What is your trade terms?
FOB, CFR,CIF or others terms are all acceptable.
7. What is your payment terms ?
Payment Terms : T/T 30% advance , 70% before shipment
IN GOODA ,THE FUTURE OF PROCESSING!
Your inquiry is welcomed at any time
Audited Supplier 
){kind=link}
){kind=link}