CHINA GOODA-HG-1830NC
Taiwan original precision grinding head
intelligent operation system
TECHNICAL PARAMETER
| Item |
Unit |
Model |
| HG-1830NC |
| Travel |
Max.grind length |
mm |
3000 |
| Max.grind width |
mm |
1600 |
| Net width of inside |
mm |
1800 |
| Max.thickness |
mm |
600 |
| Table size(L*W) |
mm |
3000*1500 |
| Grinding Head |
Front and back moving speed |
m/min |
5-28 |
| Left and right moving speed |
mm/min |
5-3000 |
| Up-and-down moving speed |
mm/min |
5-3000 |
| Min calibration |
mm |
0.005 |
| Power of grinding head motor |
kw |
18.5 |
| Speed |
Rpm |
1400 |
| Wheel size(Outside diameter * width * inside diameter) |
mm |
500*75*203 |
| motor |
Motor of worktable |
kw |
22 |
| Left and right moving motor |
kw |
2 |
| Up-and-down moving motor |
kw |
2 |
| Max.loading weight |
ton |
8 |
| Machine weight |
ton |
33 |
Machine structure features
1. Horizontal grinding head
The horizontal grinding head adopts high-precision flange type spindle design. With three pairs of super-precision angular contact bearings (made in Japan/Germany), using high-temperature resistant high-grade lubricating grease, completely sealed, no need for additional maintenance. Therefore, it can maintain high quality characteristics such as low noise, high precision and low temperature during grinding.
2.Worktable drive
The worktable adopts the fully supported double V self-positioning type hard rail design, the base rail is processed by high frequency, HRC55°±3°, the worktable rail is affixed with PTFE rail tape, to ensure the good smoothness and guidance of the table motion rail.
3.Gantry frame
The lower part of the double column is firmly connected with the bed, the upper part is tightly connected with the beam, and the machine bed, the double column and the beam form a rigid closed frame structure.
4. Grinding head drive
The grinding head is equipped with AC servo electric drive, with large torque and accurate feed.
5. Grinding wheel
The grinding machine is equipped with a safety type grinding wheel with buffer protection device. The wheel adopts reasonable structural transformation, so that the safety of the operator is guaranteed.
6. Lubrication system
The machine base adopts automatic circulating lubrication device. The horizontal and vertical motion guide rails and the ball screw adopt timing and quantitative automatic lubrication device, the operation is humanized, and the machine runs safely and reliably.
7.Cooling system
The machine coolant device is recycled after multi-stage filtration.
8. Pipeline protection
The horizontal and vertical movement pipelines of the machine adopt towline mechanism, which is safe and beautiful.
9. Hydraulic control system
The hydraulic system uses an independent hydraulic station. The hydraulic system controls the balance of the longitudinal movement of the worktable and the vertical movement of the grinding head.
10. Electric Magnet
The electric permanent magnet does not need electric energy during the working process, and only uses the permanent magnetic suction to hold the workpiece. It does not use any energy in work and produces safe, strong and efficient power, which is economical and environmentally friendly.
Company Profile
We are the first manufacturer to produce the high-end CNC machine in China, who focusing on developing and supplying the high efficiency, high accuracy, and high quality of CNC Duplex Milling Machine, Exchange-Pallet Vertical CNC Milling Machine,CNC Gantry Grinding Machine,5-Axis High Speed Gantry Machining Center , CNC High Speed Saw Machine and CNC Chamfering Machine.
Our aspiration is to be flexible in implementing customer requirements, guarantee the high reliability of the milling machine, ensure that spare parts are available at short notice and facilitate the prompt availability of service engineers.
Cooperative Partner
Audited Supplier 
){kind=link}
){kind=link}